×
Create a new article
Write your page title here:
We currently have 3,189 articles on s23. Type your article name above or create one of the articles listed here!



    s23
    3,189Articles

    Concord/NhModifyElements

    nhModifyElements[edit]

    nhModifyElements changes selected attributes for one or more elements
    maintained by eHealth. You can use three methods to specify elements: use
    standard input (stdin), use the -inFile argument, or redirect the output of
    the nhListElements command as input.
    
    CAUTION: Improper use of this command can result in failure to poll or
             incorrect report data.  Use this command only if you are an
             advanced user and are familiar with the effects of this command.
    
    nhModifyElements [ -h ] [ -rev ] -fieldName <fieldName> [ -value <value> ]
        [ -inFile <fileName> ] [ -verify ]
    
    -h   (Optional) Displays this command usage.
    
    -rev (Optional) Displays the eHealth software revision.
    
    -fieldName <fieldName>
        (Required) Specifies one of the following element fields to update:
        alias, name, poll, pollRate, speed, speedIn, speedOut, includeLanWan
        or nmsState. You can update only one field at a time. For specific
        information and requirements concerning the values of each of these
        field names, refer to the eHealth Administration Reference.
    
    -value <value>
        (Optional) Modifies a property for a set of elements without requiring
        you to generate an input file where the data format is name,value.
        Specify -value with the following fieldName values: poll (yes, no),
        pollRate (fast, normal, slow), speed|speedIn|speedOut (speed in bits
        per second), includeLanWan (yes, no).
        NOTE: You cannot use the -value parameter with the name or alias fields
    
    -inFile <filename>
        (Optional) Specifies the name of the file that contains the list of
        modifications. Use -inFile to specify unique values for each element,
        not the same value for all elements; or, create a list and use -value
        to specify the same value for all elements in the list. If you do not
        specify an input file, eHealth reads input from standard input. Input
        has the following format:
    
        name[,value]
        name[,value]
        ...
        name[,value]
    
        If you do not use the -value argument, you must specify a value for
        each element in the list.
    
    -verify
        (Optional) Processes the input and produces a DCI file, but does not
        modify the elements in the eHealth configuration.
    
    The following example changes the poll rate of all elements in the file
    subnet5Routers to normal:
    
    nhModifyElements -fieldName pollRate -value normal -inFile subnet5Routers
    
    The following command finds all elements that have not collected data for
    four hours and turns off polling for them:
    
    nhListElements -noDbDataFor 4 | nhModifyElements -fieldName poll -value off
    
    The following command lists all elements that have a speed of 9600 bps and
    changes them to a speed of 19200 bps:
    
    nhListElements -where "speed = 9600" | nhModifyElements -fieldName speed
    -value 19200
    
    For more information, refer to the eHealth Administration Reference.
    
    

    Back to Concord Index

    Cookies help us deliver our services. By using our services, you agree to our use of cookies.
    Cookies help us deliver our services. By using our services, you agree to our use of cookies.